Capacity Control and Faults in Refrigeration Systems Vocational Training Equipment Refrigeration Training Equipment
AF242-14 Capacity Control and Faults in Refrigeration Systems Vocational Training Equipment Refrigeration Training Equipment For Vocational Training Center, Technical Institution, Engineering University, TVET Schools
- Description
- Inquiry
Description
AF242-14 Capacity Control and Faults in Refrigeration Systems Vocational Training Equipment Refrigeration Training Equipment
Specification
[1] study of a refrigeration system with refrigeration and freezing chambers
[2] refrigeration circuit with compressor, condenser, capacity controller, start-up controller, combined pressure switch and 2 evaporators in insulated chambers
[3] each chamber with solenoid valve, thermostat, thermostatic expansion valve, fan and heat exchanger for refrigerant supercooling
[4] determination of cooling capacity to the condenser and evaporators
[5] simulation of more than 12 faults
[6] study of the thermodynamics cycle of enthalpy diagram and displayer PC
Technical Data
Compressor
- refrigeration capacity: 1600…1800W at -10/50°C
- power consumption: 950…1000W
Condenser with fan
– air flow rate: 570…1700m³/h
- +ve cold chamber with evaporator exchange surface area: 1.1…1.4 m²
- -ve cold chamber with evaporator exchange surface: 1.6…1.9m²
-Electric defrost heater: 120…150W
-Capacity controller: 0.1…8bar
-Start-up controller: 0.1…8bar
-Thermostat: 2x -25…15°C
-Evaporation pressure controller: 0…6bar
Refrigerant R134a or equivalent