SSP-1 Programmable Systems Simulator Vocational Training Equipment Mechatronics Training Equipment
SSP-1 Programmable Systems Simulator Vocational Training Equipment Mechatronics Training Equipment
- Description
- Inquiry
Description
SSP-1 Programmable Systems Simulator Vocational Training Equipment Mechatronics Training Equipment
System Simulator mod. SSP-1 is equipped with 20 interchangeable masks, thus it cam reproduce different installations with sequential and analog control. Simple electric connections can interface the process reproduced on the mask to PLC inputs and outputs.
TRAINING PROGRAM:
The training program includes the following exercises:
1 – FILLING A BIN
Managing the process control for filling a bin
2 – ELEVATOR
Controlling an elevator moving on 4 floors
3 – PEDESTRIAN TRAFFIC LIGHT
Controlling a traffic light unit on main road with pedestrian crossing
4 – STARTING AN ASYNCHRONOUS WOUND-ROTOR MOTOR
Controlling the starting sequence by 1, 2 or 3 (selectable) steps. Resetting the initial conditions at stop
5 – STARTING DAHLANDER MOTOR
Controlling the HIGH / LOW motor speed
6 – REVERSAL OF ROTATION OF ASYNCHRONOUS MOTOR
Controlling the direction of rotation of the motor
7 – STAR-DELTA START OF ASYNCHRONOUS MOTOR
Controlling the D/Y starting sequence at adjustable times; resetting the initial conditions at stop
8 – SEQUENTIAL NEON SIGN
Controlling different programs of sequential lighting of 1 to 8 lamps, with separate variation of lighting times; operation: AUTO/MAN and UP/DOWN
9 – DRINK MACHINE
Simulating the different operation sequences of a drink machine
10 – REACTOR
Managing the reaction with control of refrigerant (hot and cold) and of mixer
11 – MIXER
Controlling the mixing process of different substances
12 – STARTING AN ASYNCHRONOUS MOTOR
Starting sequence of an asynchronous motor
13 – CAR PARK
Controlling a car park with indications of “FULL” and of “FREE BAYS”
14 – COMPRESSED AIR NETWORK
Controlling compressors and tank for production and distribution of compressed air
15 – CONVEYOR BELTS 1
Transport of sandy material controlled by three conveyor belts
16 – CONVEYOR BELTS 2
Controlling conveyor belts for the transport of various products
17 – FILLING SYSTEM 1
Automatic filling process of tablets
18 – FILLING SYSTEM 2
Filling process of three tanks
19 – MACHINING LINE
Implementation of different sequences by the use of all the phase or of some of them
20 – MONITORING THE OPERATION OF FOUR PUMPS
Controlling the operation of four pumps for testing pressure inside a distribution network
TECHNICAL SPECIFICATIONS:
This System Simulator consists of a panel that can be used as tabletop unit or mounted on vertical frame.
It includes 12 inputs and 12 digital outputs connected via safety leads with plugs of Ø 4 mm. Two potentiometers enable to set two analog variables (0 – 10 V) used, for instance, to indicate the filling rate of a bin, the up and down movements of an elevator, etc…
6 instantaneous contacts held by switches and 6 LEDs of state indication are available on the fore panel.
A bargraph display will show the level of a tank or the position of an elevator; 6 electric limit switches enable to monitor the minimum/maximum positions, as well as the intermediate positions.
Power supply: 24 Vdc (output by the PLC)
Dimensions: 390 x 297 x 100 mm
Net weight: 5 kg
