AF817S2 Petrol Engine Cutaway Model Teaching  Equipment  Automobile Training Equipment

Description

AF817S2 Petrol Engine Cutaway Model Teaching  Equipment  Automobile Training Equipment

1. Product Introduction
The gasoline engine anatomy demonstration table adopts the electronically controlled gasoline engine assembly for section processing, with complete parts and reasonable section positions, which can comprehensively display the internal and external structures of the gasoline engine and the movement of the components, and is suitable for the teaching of gasoline engine principles and mechanical mechanisms.
2. Features
1. Use the original gasoline engine physical assembly to cut the mechanism, fully display the internal and external structure of the gasoline engine mechanism.
2. Spray the mechanical sections of the engine with different colors of paint.
3. The single-phase gear reduction motor with adjustable speed drives the engine crankshaft to run at low speed, which truly demonstrates the movement process of the internal mechanical parts of the gasoline engine.
4. The mobile platform is welded with high-strength steel structure, and the surface is treated by spraying process. There is a self-locking caster device at the bottom of the mobile platform, which is movable and convenient for teaching.
5. Anatomical site:
Cylinder block (observable outside the operation of the piston and crankshaft);
Valve cover (visible outside camshaft operation);
Cylinder head (observable outside the operation of intake and exhaust valves);
Intake and exhaust manifolds and filters;
Generators and pumps;
Timing mechanism (observable outside the operation of the timing mechanism);
3. Technical specifications
Dimensions: (length × width × height) 800-100-1200
Power supply: 220V
Single-phase geared motors:
Rated voltage: AC 220V
Rated power: 250W
Rated speed: 0-15 rpm
Working temperature: -40℃～+50℃

a. Should be Toyota or equivalent petrol engine with VVTI injection
b. Should be on stand with wheels
c. The cutaway model should carefully sectioned for training purposes, professionally painted with different colors to better differentiate the various parts, cross-sections, lubricating circuits, fuel system, cooling system etc.
d. Should be operated manually through a crank handle
e. Cylinder : 4 cylinders
f. Displacement: Min. 1000-1300 cc
g. Should have DOHC double overhead camshaft
h. Should have VVTI system with electronically controlled intake valves
i. valves : Min. 4 per cylinder
j. Should have Roller chain
k. Should have multi-point electronic injection with throttle
l. alternator: 12V
m. Dimension: 65x85x95 mm