PLC-V8 PLC Training Panel Vocational Education Equipment for School Lab Electrical Automatic Trainer
Inside a laboratory for automation technologies, the trainer mod. PLC-V8 is the necessary tool for the high level training of technicians operating in modern process industry, for installations maintenance and program designing levels.
TRAINING PROGRAM:
The trainer PLC-V8 enables the theoretical analysis and the experiments on the following main exercises:
- PLC architecture
- Instructions processing: the cycle concept
- Synchronous, asynchronous and priority cycles
- 2 rotating potentiometers for setting the analog references
- Ø 4 mm and Ø 2 mm standard safety terminals for theconnection of I/O to external devices
- Communication Protocol: TCP/IP
- Industrial communication interface: ProfiNet
- Performing times, cycle and reaction
- Boolean Algebra
- KOPand FUPbasic programming
- Combinational logic functions
- Sequential logic functions
- Addressing
- Timers & counters
- Clock generators
- Monostable and bistable circuits
- Algebra operation: addition, subtraction, multiplication,division
- BCD/binary and Binary/BCD conversions
- Integrated functions of fast counting, frequencymeasurement, positioning
- Program Blocs
- PID control with auto-tuning
- Interrupt related to internal and external events
- Programming and use of industrial operators panels
- Industrial networks: ProfiNet
Typical application
- Mechatronics modules
PID regulations
- Process control (Level, flow, pressure, temperature)
PLC and PC Communication
- Inputs/Outputs diagnosis
- Internal states diagnosis
- I/O and internal variables forcing
- PLC networks (Master/Slave)
TECHNICAL SPECIFICATIONS:
- Tabletop metal box with press-formed aluminium sectionstructure
- Side handles, not protruding, for easy transport in thelaboratory
- Front panel, in insulating material, with silk screenrepresentation of the diagrams and inner components of theequipment
- 24 Vdc/2 A power supply for control of the digital inputs andoutputs. With electronic protection against short-circuits andoverloads.
- 24 Vac/2 A power supply relay outputs control with fuseprotection against overloads
- 1 3 and 1/2-digit digital voltmeter for measurement of thevoltage present across the inputs or the analog output 0.1Vdc resolution.
- 1 Rotating switch for voltmeter input selection
- 2 analog inputs V/I: 0÷10 Vdc, 0÷20 mA
- 1 analog output V/I: ±10 Vdc, 0÷20 mA
- 14 Digital standard inputs of which 6 special for fast counting
- Digital inputs simulator with permanent and pulse stateswitches
- 10 24 Vdc digital outputs of which 2 with f=100 kHz pulses
- Safety terminals, standard ø 4 mm and ø 2 mm for connectionof the inputs and outputs to external devices.
Digital outputs interfacing
- With 10 Aac/2 Adc relay
- Transistor for fast applications
PLC characteristics
- Power Supply: 24 Vdc
- Hardware clock: YES
- Backup time: 240 h
- Working record: 50 kbyte
- Data record: 2 Mbyte
- Speed: 0,1 µs for binary instruction
- Programming interface: TCP/IP
- Network interface: PROFINET
- Digital inputs: 14 at 24 Vdc; potential separation; protectionfrom polarity inversion. Bit, byte, word addressing, fromwhich 6 with fast counting functions
- Input state display: YES (green LED)
- Digital outputs: 10 at 24 Vdc/0,5A; galvanic separationfrom CPU; immunity against short-circuits. Bit, byte, wordaddressing from which 2 with f = 100 kHz pulses
- Output state display: YES (LED diodes)
- Analog inputs: 2 voltage/current
- Range of the analog input voltage: 0..10 Vdc
- Range of the analog input current: 0÷20 mA
- Analog outputs: 1 voltage\current
- Range of the analog output voltage: ±10 Vdc
- Range of the analog output current: 0..20 mA
- Ethernet cable for connection to PC included
- Single-phase power supply cable
Power supply: 230 Vac 50 Hz single-phase (Other voltage and frequency on request)
Dimensions: 415 x 400 x 150 mm
Net Weight: 10 kg