PLC-V6 PLC Training Panel Vocational Education Equipment for School Lab Electrical Training Panel
Inside a laboratory for automation technologies, the trainer mod. PLC-V6 is the necessary tool for the training of technicians operating industry, for installations maintenance and program designing levels.
TRAINING PROGRAM:
The trainer PLC-V6 enables the theoretical analysis and the experiments on the following main exercises:
- PLC architecture
- Instructions processing: the cycle concept
- Synchronous, asynchronous and priority cycles
- 4 rotating potentiometers for setting the analog references
- Ø 4 mm and Ø 2 mm standard safety terminals for theconnection of I/O to external devices
- Communication Protocol: TCP/IP
- Industrial communication interface: ProfiNet and Profibus
- Performing times, cycle and reaction
- Boolean Algebra
- AWL, KOP, FUP, SCL, S7-GRAPHprogramming
- Combinational logic functions
- Sequential logic functions
- Addressing
- Timers & counters
- Clock generators
- Monostable and bistable circuits
- Algebra operation: addition, subtraction, multiplication,division
- BCD/binary and Binary/BCD conversions
- Integrated functions of fast counting, frequencymeasurement, positioning
- Program Blocs
- PID control with auto-tuning
- Interrupt related to internal and external events
- Programming and use of industrial operators panels
- Industrial networks: Profinet and Profibus
Typical application
- Mechatronics modules
PID regulations
- Process control (Level, flow, pressure, temperature)
PLC and PC Communication:
- Inputs/Outputs diagnosis
- Internal states diagnosis
- I/O and internal variables forcing
- PLC networks (Master/Slave)
TECHNICAL SPECIFICATIONS:
- Metal box with press-formed aluminium section structure
- Tiltable side supports to adjust the trainer inclination
- Front panel, in insulating material, with silk screenrepresentation of the diagrams and inner components of theequipment
- 24 Vdc / 8 A power supply for control of the digital inputs andoutputs. With electronic protection against short-circuits andoverloads.
- 24 Vac / 3 A power supply relay outputs control with fuseprotection against overloads
- 1 31/2-digit digital voltmeter for measurement of the voltagepresent across the inputs or the analog output 0.1 Vdcresolution.
- 1 Rotating switch for voltmeter input selection
- 8 analog inputs (16 bit): 4x V, 2x I, 2x RTD/TC
- 4 analog outputs (16 bit): 2x V, 2x I
- Digital inputs: 32 at 24 Vcc, groups of 16
- Digital outputs: 32 at 24 Vcc / 0,5 A
- Digital input simulator with permanent and pulse stateswitches
- Safety terminals, standard ø 4 mm and ø 2 mm for connectionof the inputs and outputs to external devices.
- Digital outputs interfacing
– 16 with 10 Aac/2 Adc relay
– 32 transistor for fast applications
PLC characteristics
- Power Supply: 24 Vdc
- Onboard CPU display (Screen diagonal: 6.1 cm)
- Level 4 protection system
- Hardware clock: YES
- Load memory: 1 MB code
- Data record: 5 MB
- Speed: 10ns Bit operation
- Integrated technology: motion, setting, counting andmeasuring
- Integrated tracing
- 1st interface: PROFINET IO controller, RT/IRT support, 2 ports,MRP, TCP/IP communications protocol, S7 communication,web server, routing
- 2nd interface: PROFINET basic services, TCP/IPcommunications protocol, server web, routing
- 3rd interface: master PROFIBUS DP
- Digital inputs: 32 at 24 Vdc, groups of 16 inputs; Input delay0,05..20ms; input-type 3 (IEC 61131); diagnostic interrupt;process interrupt
- Input state display: green LED
- Digital outputs: 32 at 24 Vcc / 0,5 A, groups of 8 outputs, eachgroup 4 A, diagnostic interrupt
- Output state display: LED diodes
- 8 analog inputs V/I/RTD/TC, 16 bit, groups of 8 inputs,Common-mode voltage 10V, diagnostic interrupt
- 4 analog outputs V/I, 16 bit, groups of 4 outputs, diagnosticinterrupt
- Ethernet cable for connection to PC included
- Single-phase power supply cable
Power Supply: 230 Vac 50 Hz single-phase (Other voltage and frequency on request)
Dimensions: 650 x 400 x 150 mm
Net Weight: tot 14 kg