Heat Exchanger Supply Unit Didactic Equipment Heat Transfer Demo Equipment
AF243-13 Heat Exchanger Supply Unit Didactic Equipment Heat Transfer Demo Equipment For Vocational Training Center, Technical Institution, Engineering University, TVET Schools
- Description
- Inquiry
Description
AF243-13 Heat Exchanger Supply Unit Didactic Equipment Heat Transfer Demo Equipment
Specification
⦁ Demonstration of heat transfer and comparison of a types of heat exchangers.
⦁ Determination of the overall heat transfer coefficient, Calculation of energy balance, heat loss, mean temperature difference and effectiveness
Technical Data
⦁ Electrical heater power 2…5 kW
Pump flow rate: above 10 L /min, head 3.5…7m
⦁ Power consumption: 170…2000W
⦁ Hot water temperature: 50…100ºC.
⦁ The unit is supplied with an electronic and computerized monitoring system, including computer.
Accessories
- plate heat exchanger
- tubular heat exchanger
- double jacketed vessel and coil heat exchanger
- shell tube heat exchanger
1.plate heat exchanger
⦁ Number of plate: 6…20
⦁ Heat transfer surface: 480…2500cm2
2.tubular heat exchanger
⦁ Power of the heater approx. : 1.8…3.5kW
⦁ Thermostat approx.: 15 …. 100°C
⦁ Hot water tank: 20…25 litre
Approximate heat transfer area
⦁ Hot side: 0.03…0.04m2
⦁ Cold side: 0.04…0.055m2
3.double jacketed vessel and coil heat exchanger
⦁ Approx. dimensions: 450 x 260 x 440 mm
⦁ Inner vessel volume: 1700…2000 cm3
⦁ Coil lenght: 250..300 cm
⦁ Coil-inner vessel exchange area: 0.03…0.07 m2
4.Shell & tube heat exchanger
Heat transfer area: 180…250cm2
Tube material, stainless steel
- Ø outer: 4.5….6mm, thickness 1mm
- number of tubes, 7….10
Shell, transparent
- Ø outer: 44….50mm, thickness 3mm
4 temperature sensors (input and output)
T type thermocouple and 2 flow meters (scale 0…25L/min)
hot and cold water supply