ESS Thin-Film Evaporation Pilot Plant Educational Lab Equipment Chemical Engineering
ESS Thin-Film Evaporation Pilot Plant Educational Lab Equipment Chemical Engineering
- Description
- Inquiry
Description
ESS Thin-Film Evaporation Pilot Plant Educational Lab Equipment Chemical Engineering
This evaporator consists of a cylindrical tube provided with a steam heating jacket and with a three-blade inner rotor that produces a very thin film of liquid on the walls.
TRAINING PROGRAM
This unit enables to deepen the following issues:
- Mass balances
- Energy balances
- Determination of global heat transfer coefficient
- Optimization of evaporation process
TECHNICAL SPECIFICATIONS:
Mod. ESS
- Framework of AISI 304 stainless steel with castors
- Feeding tank of borosilicate glass, with capacity of 10 l
- Tank of borosilicate glass, with capacity of 10 l, for collectingthe concentrated solution
- Tank of borosilicate glass, with capacity of 10 l, for collectingthe evaporated solvent
- Thin-film evaporator of AISI 316 stainless steel, providedwith 3-blade rotor 0.5 mm far from the wall; speed variablefrom 0 to 1500 rpm by inverter; exchange surface: 0.12 m2; evaporating capacity: 10 kg/h of H2O; double mechanical seal lubricated with silicone oil and water cooled
- Shell-and-tube condenser of AISI 304 stainless steel withexchange surface of 1.1 m2
- Feed metering pump of AISI 316 stainless steel (0 to 20 l/h),equipped with pneumatic actuator that can be driven by asignal of 0.2 to 1 bar
- Liquid-ring vacuum pump with air/water separator andsolenoid on-off valve for feeding water
- Steam trap of AISI 304 stainless steel
- Pneumatic valve of AISI 316 stainless steel, Cv = 0.32, for thecontrol of steam flow rate
- Differential-pressure transmitter of AISI 316 stainless steelfor measuring the steam flow rate, with calibrateddiaphragm of AISI 304 stainless steel
- 2 pressure gauges of AISI 304 stainless steel, with range of0 to 1.6 and of 0 to 6 bar
- Vacuum gauge of AISI 304 stainless steel, with range of
–1 to 0 bar
- 2 sight glasses of stainless steel
- 6 thermoresistances Pt 100 with sheath of AISI 316stainless steel
- 6 electronic temperature indicators
- Piping and valves of AISI 304 and AISI 316 stainless steel
- Switchboard IP55, complying with EC conformity mark,including plant synoptic and ELCB
- Emergency button
Supply with
THEORETICAL – EXPERIMENTAL HANDBOOK