EDE Double-Effect Falling Film Evaporation Pilot Plant Teaching Equipment Chemical Engineering
This unit consists of two falling-film shell-and-tube evaporators and of a shell-and-tube condenser; the first stage is heated by steam, whereas the second stage is heated by the solvent vaporized in the first stage.
TRAINING PROGRAM
This unit enables to deepen the following issues:
- Mass balances
- Energy balances
- Determination of overall heat transfer coefficient
- Optimization of the evaporation process
TECHNICAL SPECIFICATIONS:
Mod. EDE
- Framework of AISI 304 stainless steel with castors
- Metering pump with double body of stainless steel AISI316,flow rate of 0-32 l/h, and pneumatic actuator
- Feeding tank of borosilicate glass, with capacity of 25 l
- Tank of borosilicate glass, with capacity of 10 l, for collectingthe concentrated product
- Tank of borosilicate glass, with capacity of 10 l, for collectingthe condensed solvent
- 2 steam traps of AISI 304 stainless steel
- 2 graduated tanks of borosilicate glass for measuring thecondensate, with capacity of 1 l
- Bourdon pressure gauge of AISI 304 stainless steel, withrange of 0 to 6 bar
- Bourdon pressure gauge of AISI 304 stainless steel, withrange of 0 to 1.6 bar
- Bourdon vacuum gauge of AISI 304 stainless steel, withrange of 0 to -1 bar
- 2 falling-film shell-and-tube evaporators of AISI 304 stainlesssteel, each one with exchange surface of 0.27m2
- Shell-and-tube condenser of AISI 304 stainless steel,with exchange surface of 1.1 m2
- Tube-in-tube heat exchanger of AISI 304 stainless steel
- Electronic first-effect level transmitter, capacitance type,with board-type display
- Pneumatic valve of AISI 316 stainless steel, (Cv = 0.32)for the control of steam flow rate
- Calibrated diaphragm of stainless steel with differentialpressure transmitter of AISI 316 stainless steel for measuringthe steam flow rate
- 12 thermoresistances Pt 100 with sheath of AISI 316stainless steel
- 12 board-type electronic temperature indicators
- Flowmeter of glass and steel with range of 25 to 250 l/h
- Liquid-ring vacuum pump provided with air/water separatorand solenoid valve for feeding water
- Piping and valves of AISI 304 and AISI 316 stainless steel
- Switchboard IP55, complying with EC conformity mark,including plant synoptic and ELCB
- Emergency button
Supply with
THEORETICAL – EXPERIMENTAL HANDBOOK