DYF Pressure Losses Pilot Plant Educational Training Equipment Fluids Engineering Experiment Equipment
This equipment consists of a hydraulic circuit including pump and flowmeter and enabling to be connected with various hydraulic components, where the pressure drops on these elements can be measured.
TRAINING PROGRAM
This unit enables to deepen the following issues:
- Determining pressure drops in pipes of different diameter
- Determining pressure drops in bends and elbows
- Determining pressure drops in pipe expansions andrestrictions
- Measuring the flow rate with calibrated orifice andcomputing the discharge coefficient α
- Measuring the flow rate with Venturi tube and computingthe discharge coefficient α
- Checking the laminar, transition and turbulent flowsby tracer
- Verifying Bernoulli’s theorem
TECHNICAL SPECIFICATIONS:
Mod. DYF
- Framework of AISI 304 stainless steel with castors
- Centrifugal pump with body and impeller of bronze,Qmax = 10 m3/h, H = 18 m
- Tank of AISI 304 stainless steel, with capacity of 80 l
- Variable area flowmeter of AISI 304 stainless steel,with range of 1 to 10 m3/h
- Angle valve (DN 25) of borosilicate glass, with plug of PTFE
- Diaphragm valve of borosilicate glass – DN 25
- Pipe of AISI 304 stainless steel of ½”
- Pipe of AISI 304 stainless steel of 1”
- Pipe of borosilicate glass DN15
- Pipe of borosilicate glass DN25
- Pipe of AISI 304 stainless steel with U and L bends
- Pipe of AISI 304 stainless steel with sudden expansionand restriction
- Pipe of AISI 304 stainless steel with calibrated orifice
- Pipe of AISI 304 stainless steel with Venturi tubeof Plexiglas
- Pipe of borosilicate glass for checking the laminarand turbulent flows by tracer
- Tank of borosilicate glass, with capacity of 1 l, for tracer
- Bourdon gauge of AISI 304 stainless steel
- Stainless steel differential mercury gauge (mercury notsupplied; the instrument can be replaced with a digitalpressure gauge on request during order placement)
- Thermometer with range of 0 to 100 °C
- Piping and valves of AISI 304 and AISI 316 stainless steel
- Switchboard IP55, complying with EC conformity mark,including plant synoptic and ELCB
- Emergency button
Supply with
THEORETICAL – EXPERIMENTAL HANDBOOK