airyamachine

Drinking Water Installation Demonstrator Vocational Training Equipment Fluids Engineering Experiment Equipment

AFS003 Drinking Water Installation Demonstrator Vocational Training Equipment Fluids Engineering Experiment Equipment

1.Description

A typical household drinking water installation is fitted to the panel. A small electrical boiler for hot water and a circulation pipe with the related components demonstrate the heating of domestic hot water from the cold water supplied.

Safety devices show how the drinking water pipework is protected against the backflow of waste water.

A pipe system for draining the waste water is mounted on the back of the panel.

 

2.Technical details

Specification

familiarisation with the most important components in a drinking water installation

system divided into cold water side, hot water side, drain system

cold water circuit with water meter, pressure reducing valve, angle-seat valve, system separator, outlets

hot water circuit with system of safety devices, pressure vessel with heater, pressure reducing valve, non-return valve, circulating pump with timer, outlets

drain system on rear of panel, drain pipe DN 40 with high temperature stability

single handle mixer, two handle mixer, shower sprinkler, pipe vents

 

Technical data

Vane impeller water meter DN20: 2.5m3/h

System of safety devices, 6bar

backflow preventer

pressure reducing valve

shut-off valve

Thermal discharge safety device: 95°C

Threaded heater element 3kW (in pressure vessel)

Pump

power consumption: 20W

max. flow rate: 640L/h

max. head: 1,4m

max. operating temperature: 110°C

 

Measuring ranges

pressure: 3x 0…10bar

230V, 50Hz, 1 phase

230V, 60Hz, 1 phase

230V, 60Hz, 3 phases

 

Required for operation

cold water connection: 1,5bar, drain

Exit mobile version