DIS Batch Distillation Pilot Plant Vocational Education Equipment for School Lab
DIS Batch Distillation Pilot Plant Vocational Education Equipment for School Lab
- Description
- Inquiry
Description
DIS Batch Distillation Pilot Plant Vocational Education Equipment for School Lab
The distillation column is completely made of glass and it consists of a reboiler, of a column with steel mesh packing and of a condenser with reflux valve and head.
Training program
This unit enables to deepen the following issues:
- Distillation of different mixtures (water / ethanol, water / methanol, methanol / propanol, etc…) versus the variation of the following operational parameters:
- reflux ratio
- reboiler heating power
- feeding composition
- residual pressure
- Mass balance
- Energy balance
- Flooding
- Calculation of the number of theoretical trays
TECHNICAL SPECIFICATIONS:
Mod. DIS
- Framework of AISI 304 stainless steel with castors
- Distillation column of borosilicate glass, DN 50, h = 1100 mm,with packing of AISI 316 stainless steel mesh
- Reflux head of borosilicate glass equipped with solenoidvalve for the control of reflux ratio
- Over head condenser of borosilicate glass, with exchangesurface of 0.4 m2
- Reboiler of borosilicate glass, with capacity of 5 l, equippedwith quartz-sheathed electric resistor of 2.5 kW
- Vacuum gauge of AISI 304 stainless steel, with rangeof -1 to 0 bar
- 2 programmable timers for the control of reflux ratio
- 8 thermoresistances Pt 100, with sheath of AISI 316stainless steel
- 8 electronic temperature indicators
- Electronic differential pressure transmitter (between columntop and bottom) of AISI 316 stainless steel , with rangeof 0 to 200 mm H2O, 4-20 mA output signal
- Board-type electronic indicator of the measure of differentialpressure
- 2 graduated vessels of borosilicate glass for collecting thedistillate, with capacity of 1 l
- Tube-in-tube heat exchanger of stainless steel for coolingthe distillate
- Liquid-ring vacuum pump (P = 0.7 kW), equipped withair/water separator and check valve
- Thyristor unit for controlling the heating power
- Flowmeter of AISI 304 stainless steel for measuring the flowrate crossing the condenser: range of 0 to 250 l/h(for mod. DIS, only)
- Piping and valves of AISI 304 and 316 stainless steel
- Switchboard IP55, complying with EC conformity mark,including plant synoptic and ELCB
- Emergency button
Supply with
THEORETICAL – EXPERIMENTAL HANDBOOK