AFT093 Convection Drying Vocational Training Equipment Heat Transfer Laboratory Equipment

AFT093 Convection Drying Vocational Training Equipment Heat Transfer Laboratory Equipment

AFT093 Convection Drying Vocational Training Equipment Heat Transfer Laboratory Equipment For Vocational Training Center, Technical Institution, Engineering University, TVET Schools

Description

AFT093 Convection Drying Vocational Training Equipment Heat Transfer Laboratory Equipment

1 Description

Convection dryers are often used for drying solids in food technology. The CE 130 can be used to investigate and demonstrate the process of convection drying of granular solids.

Four corrosion resistant removable plates are available for drying the solid. They are placed in a drying channel. The plates containing the solid to be dried are exposed to an air flow in the channel. The air flow heats the solid and also removes any moisture released. Air velocity can be adjusted by the speed of a fan. An adjustable heater allows the heating of the air. The transparent door in the drying channel allows the drying process to be observed.

A digital balance can be used to follow the changes in weight of the solid due to evaporation or vaporisation of moisture during operation. The air temperature and the relative humidity of the air are measured and digitally displayed by a single combined temperature and humidity sensor before and after the air flow passes over the solid. A further sensor measures the air velocity.

The relevant measured parameters (changes in weight, humidity, temperature, air velocity) can be transferred directly to a PC, where they can then be further processed.

2 Specification

drier for investigating convection drying of solids

drying on 4 corrosion resistant plates in a drying channel with an air flow

adjustment of air velocity via speed of fan

air heating with controlled heater

digital balance for measuring the change of weight during drying

1 combined sensor for measurement of humidity and temperature before and after the solid sample

1 air velocity sensor

software for data acquisition via USB under Windows 8.1, 10

3 Technical data

Drying channel

length: 2340mm (with fan)

internal dimensions: 350x350mm

Fan

power: 33W

max. output: 700m3/h

max. speed: 950min-1

Heater

power: 0…6750W

with adjustable temperature limiter

Balance

measuring range: 0…10000g

resolution: 0,1g

Measuring ranges

air humidity: 0…100% r.F.

temperature: 0…125°C

flow velocity: 0…2,5m/s

400V, 50Hz, 3 phases

400V, 60Hz, 3 phases

230V, 60Hz, 3 phases

UL/CSA optional

Dimensions and weight

LxWxH: 2350x800x1200mm

Weight: approx. 175kg

Required for operation

PC with Windows recommended

    Contact Us








    has been added to your cart:
    Checkout