AFF139 Fluid Mixing Studies Unit Didactic Equipment Fluids Engineering Experiment Equipment

AFF139 Fluid Mixing Studies Unit Didactic Equipment Fluids Engineering Experiment Equipment

AFF139 Fluid Mixing Studies Unit Didactic Equipment Fluids Engineering Experiment Equipment For Vocational Training Center, Technical Institution, Engineering University, TVET Schools.

Description

AFF139 Fluid Mixing Studies Unit Didactic Equipment Fluids Engineering Experiment Equipment

DESCRIPTION

The apparatus comprises a clear acrylic mixing vessel mounted on a stainless steel base. Above this is mounted a variable-speed electronic mixer with electronic torque measurement incorporated.

A set of PVC baffles can be fitted into the mixer with a simple screw mechanism to hold them in place. Under the stainless steel base is a storage compartment for the various small mixer components and the simple tools (hexagonal keys) required to change them. The larger mixer components are stored on pins behind the vessel.

The Rushton turbine impeller is a one-piece stainless steel fabrication with eight alternate upward and downward-pointing blades.

The flat blade impeller comes with six sizes of blade, each of which can be fitted in seven positions (vertical, plus 30/45/60 degrees leading and trailing edge). The blades are simple to configure and position accurately in place using a single screw. A propeller type stirrer is also included for comparison.

FEATURES & BENEFITS

A benchtop laboratory mixing system for demonstrating and teaching fundamental principles of mixing

Electronically controlled variable-speed drive system with accurate RPM measurement display

Electronic measurement and display of torque on the drive head

The drive can be varied from 50-2,200rpm (note, not all the impellers are suitable for use at high speed)

Impellers include a true Rushton turbine with eight alternate upward and downward-pointing vertical blades, a propeller and six different sizes of flat blades

The flat blades are attached to a common mounting hub with a simple mechanism providing a precise blade angle. Seven different blade angles can be set for each blade size

The Rushton turbine and flat-bladed impellers are manufactured from stainless steel

Supplied with software to log the speed (RPM) and drive torque, calculate the power and display the data in graphs and tables

A set of baffles is included

The equipment can be operated in zero, two or four-baffle configurations

An optional heat transfer coil is available complete with temperature sensor and display

Powered by a universal power adaptor with worldwide approval

    Contact Us








    has been added to your cart:
    Checkout