AFBS3531.1 FREE AND FORCED VIBRATION SYSTEM

Description

AFBS3531.1 FREE AND FORCED VIBRATION SYSTEM

Free and Forced Vibration Apparatus for extending the range of demonstrations and experiments which may be carried out to include the free and forced vibrations of a single degree of freedom with viscous damping.

The system should contain all the necessary parts to undertake free and forced vibration, resonance and damping. A beam pivots at one end from a bracket and bearing attached to the Vibration Frame. spring should be attached to the free end of the beam to enable the beam to vibrate

The horizontal position of the spring can be adjusted using the integral adjustment

Damping could be introduced into the system by using the set of damping discs, damping tank and damping media.

A damping absorber to be attached on the beam, and could be adjusted to offset the resonance frequency of the system.

A set of calibrated weights should be supplied to vary the weight of the vibrating system. (8 nos of 5N weights)

The excitation frequency and beam displacement should fed into the main interface unit

Frame overall dimensions :

Length : 1400mm or less

Height : 1500mm or less

Width : 400mm or less

Beam: 25mm (W) x 12mm (H) x 850mm (L) or similar

Beam Material : Steel with protective coating

Beam weight : 2kg (approx)

4nos of Springs: spring rates 2.5, 0.75, 1.5, 3.0N/mm recommended

Motor Exciter Mass : 5kg (approx)

Spring steel beam

Components

Main unit and interface or controller unit

1 x Tachometer

1 x Speed controller

1 x Motor exciter

1 x Vibration absorber

1 x Vibrations frame

1 x Free & Forced vibrations module

4 x Springs

8 x 5N Weights

Pendulum Module

Torsional Oscillation Module (Free and Damped)

Damping accessory and media

Tools set

A Compatible computer (PC) should be supplied

Processor: 7th Gen. Intel Core i5 -7400 (6MB Cache) 3.0 GHz recommended

16GB DDR4 RAM recommended

1TB 5400 RPM SATA SSD recommended

OS: Windows 10 (64bit)

Keyboard /Mouse

Uninterruptible power supply (UPS) : 350 W or higher

Ports (recommended specs)

4 x USB 3.0

HDMI-out

DisplayPort 1.2

2 x Thunderbolt 3 (supports Type-C,

USB3.1,DisplayPort, PS)

Gigabit Ethernet, audio out

Display: 21.5 LED monitor is recommended / Mention if different

Powered through a compatible power supply (inclusive with) (Available Laboratory power sockets – 230V, 50Hz, Type G socket)