ADS Absorption And Stripping Pilot Plant Vocational Education Equipment for School Lab Chemical Engineering
ADS Absorption And Stripping Pilot Plant Vocational Education Equipment for School Lab Chemical Engineering
- Description
- Inquiry
Description
ADS Absorption And Stripping Pilot Plant Vocational Education Equipment for School Lab Chemical Engineering
This absorption and stripping system enables to study the mass transfer from a gaseous phase to a liquid phase (absorption) and vice versa (stripping).
TRAINING PROGRAM
This unit enables to deepen the following issues:
- Checking the absorption degree with different liquidsubstances at different temperatures
- Desorption of liquid phase into gaseous phase with a gas
- Calculation of the number of theoretical stages
- Absorption of NH3 with H2O
- Absorption of CO2 with solution of NaOH
- Stripping of NH3 with air
TECHNICAL SPECIFICATIONS:
Mod. ADS
- Framework of AISI 304 stainless steel with castors
- Column of borosilicate glass DN 80, H = 1000 mm, packedwith Raschig rings
- Heat exchanger of borosilicate glass, with exchange surfaceof 0.5 m2, installed at the bottom of the column
- Feeding tank of AISI 304 stainless steel, with capacity of 30 l
- Metering pump of AISI 316 stainless steel, Qmax = 270 l/h,including pneumatic actuator, that can be driven by a signalof 0.2 to 1 bar
- 2 pneumatic control valves of AISI 316 stainless steel,DN 15, Cv = 0.2 and 0.08
- Electronic thermal mass flowmeter of AISI 316 stainlesssteel, with range of 0 to 600 Nl/h and board-type display,for measuring the flow rate of the gas to be absorbed
- Electronic thermal mass flowmeter of AISI 316 stainlesssteel, with range of 0 to 6000 Nl/h and board-type display,for measuring the flow rate of the carrier gas
- Electronic differential pressure transmitter of AISI 316stainless steel, range of 0 to 200 mm H2O, 4-20 mA outputsignal, board-type display
- 3 thermoresistances Pt 100 with sheath of AISI 316stainless steel
- 3 electronic temperature indicators
- 3 pneumatic manual controls (for mod. ADS, only)
- Piping and valves of AISI 304 and AISI 316 stainless steel
- Switchboard IP55, complying with EC conformity mark,including plant synoptic and ELCB
- Emergency button
Supply with
THEORETICAL – EXPERIMENTAL HANDBOOK